Below are some tips and documents on handling the initial setup and operation of the ePiano™.

MOST POPULAR SET-UP TIPS:

CABINET TIP:
Put the piano top on before installing the CPU enclosure onto the cabinet base. This let’s you plug in the pedal cord—AND attach the bolts that secure the top to the base.  

MIDI CABLE/ADAPTER TIP: Note on the MIDI cables: You only need to connect the black 5 pin end of the MIDI adapter cable labeled “IN” to the “OUT TO COMPUTER” MIDI port on the back panel of the piano. The black 5 pin MIDI cable end labeled “OUT” should be left unplugged. See the MIDISetupsheet.pdf for a pictorial reference. You’re not alone—this is a common set up problem.

Systems shipped after June 2005 use a USB Adapter that changes the setup and eliminates the Gameport adapter.  

COMPUTER AUDIO TIP: There are two sound output areas (and usually 2 gameport and green audio output jacks) on the ePiano CPU—use the lower horizontally oriented group one for your ePiano audio connections. 

Most systems shipped after June 2005, have the non-functional group covered

MOVING: When moving the ePiano to a new location — rebox the CPU and Monitor into their original packages and to detach the CPU enclosure from the piano cabinet.

QUICK START TIP - USE THE MUSICONSOLE: Go to the SUPPORT button, and click on the HELP SYSTEM button for more information on your ePiano’s operation, more FAQ’s , software hints, a pdf copy of the hardware set up guide and more.